BSD Handlebar Switch SBK Yamaha YZF R1 2015> Right 5 Way (Road or Race/Std or YEC) - Clutch
£372.00 £310.00
Product ID
BD-SW-5BC-11
Stock Due In - Orderable
Bike Sport Developments 5 way race bike handlebar switch - Yamaha R1 2015 onwards , Road or race bikes, Standard or YEC kit - Right side for direct mounting as part of the brake pump assembly, this replaces the standard brake clamp
Designs are available for:
- 32mm In-line bolts, use clamp type A
- 30mm offset bolts, use clamp type B
Alternative clamps can be purchased separately, no need to replace the switch assembly.
This switch is intended to replace the standard right hand handlebar switch to provide simple Up, Down and Select push buttons replacing the scroll wheel using an intelligent control circuit board embedded within the switch body. No user programming is required, just plug it in and use it. Full data sheet download available on next page tab.
- On/Off (kill switch)
- UP function
- Select (mode) function)
- DOWN function
- Starter
Note :
- Wiring for the brake switch is not included on the standard 5BC-11 switch, to add this please request at the time of ordering.
- The aluminium assembly has been designed ultra-slim and encompasses 5 sealed switches.
No modification of the bike wiring is necessary, this kit plugs directly into standard wiring connectors
- Width at centre - 13.5mm
- Cable length - Same as the standard switch
- Coating - Black anodise
- Made in the UK
- 5 x sealed push-button switches
- Pre-wired connector to suit the standard bike wiring
- retaining screws
Alternative 3, 4 , 5 and 8 way left side switches are available for road and track bikes using the standard ECU and YEC kit wiring
| Manufacturer | BSD Switchgear |
|---|---|
| RP Code | BD-SW-5BC-11 |
| PDF Upload | bd-sw-5bc-11_data_sheet.pdf |
| Bike Manufacturer | Yamaha |
| Bike Model | YZF R1, YZF R1M |
| Bike Year | 2019, 2018, 2017, 2016, 2015 |
Related Products
Check items to add to the cart or
